ICONE X5 iDESERT, Instruction Manual For Use

Page: 84 / 92

WARNING!
Before carrying out any type of maintenance, turn off and remove the key and perform physical
pedaling and safety checks like a normal bicycle. For the battery poles, if they are dirty, clean
the poles in order not to reduce the efficiency of the battery or burn the poles themselves.
CHAIN TENSION ADJUSTMENT:
The chain may come loose after a certain period of time, please follow the instructions below:
loosen the bolts of the rear axle, if the chain is too slow, adjust the chain bolts on both sides
clockwise and put them in position. If the chain is too tight, adjust the bolts counterclockwise.
Keep the crankset and the wheel aligned. If you are unable to adjust the chain properly, contact
your nearest dealer.
ADJUST THE BRAKES:
Correct adjustment of the brakes ensures control and offers safety to the driver: the brakes
are adjusted like any other bicycle. To be in good condition it is important to make sure that
the brakes are working and that the power supply is interrupted. Once the brakes have been
adjusted, make sure that the wheels turn, that there are no obstacles and that once the brakes
are applied, the engine stops working.
LUBRICATION:
For a long-lasting hold of your e-Bike, the following parts of the bicycle should be regularly
lubricated every six months: front axle, chain, rear axle, freewheel (oversize joint), rear fork,
stand joint and other rotating parts. No electrical lubrication is required for the electrical parts,
as they are already factory lubricated. If you experience any problems, contact your nearest
dealer for help.
CLEANING:
The e-Bike should be cleaned with a damp sponge, taking care not to wet the electrical parts
(battery, connectors, motor, cables, handlebar controls, etc.). Dry with a cloth. When cleaning
the e-Bike, do not use continuous jet steam or direct water. Use a cloth to avoid a short circuit
for electrical components. The e-Bike has a durable finish and does not need wax. Clean with
a mild detergent and rub to restore the original shine if necessary.
10. Maintenance