ICONE X5 iDESERT, Instruction Manual For Use

Page: 57 / 92

4. Driving
TURNING ON:
Turn on the switch, the display will turn on when connected.
EPAC / PEDELEC:
Just like normal bicycles, place the bicycle and get on the saddle, place one foot on the
pedal and start pedaling after everything is OK. During pedaling, once a set speed has been
reached, the motor will automatically activate and start operating and making your e-Bike
move. To stop the engine, stop pedaling and the engine will stop automatically. To stop the
e-Bike use the brakes. The brakes have the function of interrupting operation, if both levers are
operated (even individually), the energy will be automatically stopped and the engine will stop.
ASSISTED POWER CHANGE (VPA):
The possibility of configuring the level of electric assistance is the proper and exclusive
functionality of the pedal assisted e-bike. This feature allows you to choose between five levels
of pedal assistance; in this way it is possible to adapt the level of assistance to the different
conditions of the route and / or road surface, a very useful feature on long journeys.
CALIBRATE THE BATTERY LEVEL:
When the battery is running low, the indicator lights will go out one by one, at this point you can
turn off the switch and use the pedals as with regular bikes (NOT e-bikes). You can recharge
the battery when you are in the vicinity of a power outlet and only then can you use the Pedal
Assistance again, as well as after the complete recharge.
PARKING:
Make sure that the switch is set to OFF so as not to accidentally start the engine. We
recommend using a padlock to protect your e-Bike if necessary.
WARNING!
Using the brakes frequently, turning the e-Bike on and off repeatedly, pedaling upwind, uphill
or carrying a lot of weight can affect battery performance, compromising the duration and
travel time.