ICONE X5 iDESERT, Instruction Manual For Use

Page: 80 / 92

1. Follow the charging instructions carefully. Otherwise, all the consequences must be assumed
by the user independently.
2. Use only the original battery charger.
3. Pay attention to the type and applicable voltage of the battery and charger. Mixed use is
strictly prohibited.
4. During charging, the e bikes must be positioned in a ventilated area; it is strictly forbidden to
charge the battery in an enclosed space or in the sun and environments with high temperatures.
5. It should be recharged for 1-2 hours after the green light turns on and therefore the power
supply must be interrupted. During non-charging, it is forbidden to connect the battery charger
to AC power for an extended period of time without charging. 6. During charging, if the warning
light is abnormal, has a particular odor or the battery charger case overheats, you must
immediately stop charging and repair or replace the battery charger.
7. During the use and storage of the battery charger, be careful to prevent the entry of foreign
substances, in particular water or other liquids, in order to avoid short circuits inside the battery
charger. The charger must be transported in the car as little as possible. If it is necessary to
transport it, it must be placed inside the box.
8. The battery charger components must not be dismantled or replaced randomly. If the battery
charger is replaced, its model must match the battery model.
In order to guarantee a long life of the bike and to ensure safe and comfortable riding, regular
checks and maintenance are required. If the bike is not used for a long time, it should be
checked regularly.
Battery charger instructions
Regular inspection and simple maintenance
The main stand should be installed in a large, flat place. If inspection while driving is required, it
should be conducted in a safe place. If an anomaly is detected through the inspection, please
drive again after troubleshooting. Any anomaly must be checked in a maintenance station to
avoid further damage.
Sufficient attention should be paid to safety during the inspection