ICONE X5 iDESERT, Instruction Manual For Use

Page: 62 / 92

Walk assist: shows when the 6km walk assist mode is on. It is not shown in other cases.
Error: this icon flashes in the event of a system malfunction and will not be displayed during normal
use.
System maintenance: shows when system maintenance is needed (shows when the mileage
exceeds the set value or the number of battery cycles reaches the set value. If the customer does not
request it, it is closed and is not displayed as the default).
USB: shows when the display communicates with the PC, is not shown at other times.
Speed: when the display is on, it shows the speed.
7 speed mode: SPEED indicates that the speed shown on the display is the current speed, AVG
SPEED indicates that the indicated speed is the average speed, MAX SPEED indicates that the
indicated speed is the maximum speed.
Power indicator: five power levels indicator under voltage.
Charge percentage: indicates the percentage of charge of the battery.
Mode: shows the assistance mode, from low power assistance to high power assistance: ECO,
TOUR, SPORT, TURBO, ECO by default; OFF indicates the absence of assistance.
Speed unit: indicates the unit of speed, Km / h or MPH.
Engine power: it has five sections to show the engine power in real time.
Travel time: shows the travel time of the trip.
Time: shows the driving time including hours and minutes
Travel miles: when this icon is active, the number after the icon indicates the mileage of each trip,
the unit can be miles or kilometers.
ODO: when this icon is active, the number after the icon indicates the mileage of all trips; units can
be miles or kilometers.
Unit: is the unit of travel mileage and total mileage, with the Mile and KM 2 options.
Mileage: shows the mileage number. Trip mileage is accurate to one decimal place. Total mileage is
accurate to single digits.