ICONE X5 iDESERT, Instruction Manual For Use

Page: 73 / 92

Error shown.
Presentation of the error code and the error icon:
ERROR setting
Interface shown as below:
Error code table:
ERROR CODE
ERROR DESCRIPTION VERIFICATION METHOD
“04” SHOWN AT SPEED
“05” SHOWN AT SPEED
“07” SHOWN AT SPEED
“08” SHOWN AT SPEED
“09” SHOWN AT SPEED
“11” SHOWN AT SPEED
“12” SHOWN AT SPEED
“13” SHOWN AT SPEED
“14” SHOWN AT SPEED
“21” SHOWN AT SPEED
“22” SHOWN AT SPEED
“30” SHOWN AT SPEED
Throttle doesn’t turn back to zero position
Throttle failure
Overvoltage protection
Failure of motor’s hall signal wire
Failure of motor’s phase wire
Failure of the controller’s temperature sensor
Failure of the current sensor
Failure of the temperature of the battery
Failure of the temperature of the motor
Failure of the speed sensor
Failure of the BMS communication
Communication failure
Check if the accelerator returns to zero position
Check if the accelerator
Check the battery voltage
Check the engine
Check the engine
Check the controller sensor
Check the controller
Check the battery
Check the engine
Check the position of the speed sensor
Check the battery
Check the controller connector