IC
ON
MO
TO
SP
OR
TS
AI
RF
R
AM
E P
RO
M
AN
UAL
IC
ON
MO
TO
SP
OR
TS
AI
RFR
AM
E PR
O H
ELM
ET
SHIELD CHANGE & REMOVAL
The Airframe Pro is equipped with the Icon Optics™ precision
shield, providing you with an unequivocally clear and
distortion-free line of sight. All Icon Optics™ shields include
the exclusive Rapid Release™ system for the easiest shield
removal and replacement on the market. Icon
®
shields are
available in a variety of tints and styles; perfect for any riding
situation you may find yourself in.
The Icon Optics™ shield supplied with this helmet meets
Regulation VESC-8. Visors with the marking indicating
”daytime use only” are not suitable for use during the hours
of darkness or in conditions of poor visibility. Make sure the
face shield is always in perfect condition.
The Icon TracShield™ is available for the AIRFRAME PRO as
a factory solution for riders who prefer tear-offs. Compatible
with our Rapid Release™ shield change mechanism, the
TracShield™ can be used on the AIRFRAME PRO and Airmada
helmets, and is available in Dark Smoke, Clear, Yellow, and
RST Silver. Tear-offs are available separately.
1. To remove the shield, open the shield completely.
2. Push both locking levers to the open position toward
the rear of the helmet and remove the shield from the
gear plates.
3. Once removed, brace the shield with one hand, and use
the other hand to pull the side plates from the straight,
long edge (the front of the side plates).
4. Pull each side plate until they pop free from the shield.
5. To replace shield, align the tabs on the shield with holes
on the gear plates and press in until secure.
6. To replace the side plates, align tabs on side plate with
holes in shield, and snap it into place. Repeat for
adjacent side plate.
7. Test the opening and closing function of your shield
before riding.
AIRFRAME PRO
SHIELD
7
8
2
1
4
6
33
EE5
