IC
ON
MO
TO
SP
OR
TS
AI
RF
R
AM
E P
RO
M
AN
UAL
IC
ON
MO
TO
SP
OR
TS
AI
RFR
AM
E PR
O H
ELM
ET
WAIVER AND RELEASE
2
CONSTRUCTION 3
PROPER FITTING
5
CHOOSING THE CORRECT HELMET SIZE
6
CHINSTRAP
6
AIRFRAME PRO SHIELD
7
SHIELD CHANGE & SIDE PLATE REMOVAL 8
INTERIOR
9
COMFORT LINER REMOVAL
10
AIRFRAME PRO VENTING
11
VENTING SYSTEM
12
CARE AND CLEANING
13
ADVISORY
14
CONTENTS
The modern riding position - higher rear sets, lower clip-ons - has dramatically
altered how a rider interacts with the modern hypersport motorcycle. Compressed
into an ever more compact shape, the rider’s head positioning requires increased
angle to maintain visibility and stability. With this in mind, Icon
®
designed the
AIRFRAME PRO.
Concentrating on this singular design focus allowed us to realize opportunities
to decrease drag and weight by sculpting the traditional neckline to avoid jacket
or suit interference. Its aggressive geometry increases the line of sight while
improving aerodynamic attitude in a fully-tucked riding posture.
The dramatically reduced shell profile, comprised of aerospace-grade carbon
fiber or FRP, features a track-recognized ECE certification. Precision assembly
techniques further this dedication to mass reduction, allowing Icon
®
to craft a
helmet that is exceptionally light and peerlessly outfitted.
Internally, the traditional three-piece liner has been upgraded to a five-piece
liner, providing a greater amount of fitment combinations for each unique head
shape. Crown, lateral, fore and aft padding components allow for a possibility
of 27 fitment combinations in a single shell, double that of the AIRFRAME PRO’s
competitors.
Both internally and externally, the Icon
®
AIRFRAME PRO is optimized for the Angle
of Attack.
1
2
AIRFRAME PRO
ANGLE OF ATTACK
SAFETY WARNING: Riding a motorcycle is a dangerous activity. No helmet can protect a wearer against all possible impacts. When riding, always
wear a helmet, eye protection, protective clothing, gloves and boots. There is no assurance that serious injury or death can be avoided even if
you wear the helmet shown in this manual. Take all precautions to avoid every risk when riding a motorcycle. This helmet is not meant for use as
a fire retardant product and does not contain any fire retardant materials. Please ensure that your Icon
®
products fit properly. Improperly fitting
products can impair your ability to control your motorcycle.
WAIVER AND RELEASE BY OWNER: No personal protective equipment is able to safeguard against all injuries in the event of an accident or fall
from a motorcycle. No personal protective equipment can offer complete protection against impact or abrasion as a result of an accident or
fall from a motorcycle. Motorcycling is inherently dangerous in nature and use of this helmet cannot prevent injury or death. Even a low speed
accident may result in serious injury or death. When using this helmet, the user assumes all risk associated with this activity, which may cause
injury or death. The user hereby waives all claims against Icon
®
Motosports, Lemans Corporation and J-TECH Corp. for death or injury to his or
her person and hereby covenants to not sue for any claims arising as a result of injury or death while using Icon
t
Motosports products.
