![background image](http://html1.mh-extra.com/html/icom/ip110h/ip110h_operating-manual_2038205026.webp)
3
ADVANCED OPERATION
3-12
Emergency Call function
The transceiver may enter the Emergency mode through the following functions, depending on the Controller
setting�
D
Stationary Detection function
When the transceiver continuously moves for the
ON Timer preset time, the transceiver enters the
Emergency mode�
L
If the transceiver stops moving during the Reminder
Timer set time, the Emergency mode is canceled.
NOTE:
The Motion Detection function may not
properly work, depending on the surrounding
environment such as the battery capacity, the signal
strength, or the access point or network status. Icom
is not responsible for the destruction or damage
caused by using the Motion Detection function�
When the transceiver is detected as being stationary
(no motion) for the ON Timer preset time, the
transceiver enters the Emergency mode�
L
If you move the transceiver during the Reminder Timer
set time, the Emergency mode is canceled.
D
Motion Detection function
NOTE:
The Stationary Detection function may
not properly work, depending on the surrounding
environment such as the battery capacity, the signal
strength, or the access point or network status. Icom
is not responsible for the destruction or damage
caused by using the Stationary Detection function�
Acceleration
Time
Enters the
Emergency mode�
Sends an
Emergency call�
Stationary
Sensitivity
ON Timer
Reminder Timer
Emergency Timer
If moved during the Reminder
Timer, the Emergency mode is
canceled�
No motion is
detected�
Motion
Sensitivity
Acceleration
Enters the
Emergency mode�
Sends an
Emergency call�
Motion is
detected�
Time
ON Timer
Reminder Timer
Emergency Timer
If stops moving during the
Reminder Timer, the
Emergency mode is canceled�