![background image](http://html1.mh-extra.com/html/icom/ip110h/ip110h_operating-manual_2038205019.webp)
3
ADVANCED OPERATION
3-5
Area Call function
The Area Call function enables you to call the areas that the selected wireless Access Points cover�
The Area Call function may be usable, and the areas you can call may differ, depending on the Controller setting.
1. Turning ON the Area Call function
1� Push [MENU]�
2�
Push [▲]/[▼] to select “FUNCTIONS,” and then push [ENT
]�
3�
Push [▲]/[▼] to select “Area Call,” and then push [ENT
]�
4�
Push [▲]/[▼] to select “ON,” and then push [ENT
]�
5� Push [MENU]�
• Exits the MENU screen�
•
“ ” is displayed on the Standby screen.
2. Selecting a call-to party and transmitting a call
1� Push [ CLR]�
L
You can also open the Phone Book in the MENU screen� (p� 4-3)
2�
Push [▲]/[▼] to select a call type, and then push [ENT
]�
(Example: Group)
L
See page 3-6 about Talkgroup�
3�
Push [▲]/[▼] to select a tab, and then push [ENT
]� (Example: S)
4�
Push [▲]/[▼] to select a call-to party, and then push [ENT
]�
(Example: Sales group1)
5�
While holding down [PTT], speak into the microphone at your normal voice level.
[ CLR]
[ENT
]
[▲]/[▼]
L
You can also select the call-to party from the Call History entries� (p� 2-5)
[MENU]
[ENT
]
[▲]/[▼]
[PTT]