![background image](http://html1.mh-extra.com/html/icom/ip110h/ip110h_operating-manual_2038205041.webp)
5
OPTIONS
5-7
Using a Bluetooth headset
D
Pairing the IP110H with the VS-3
3. Pairing and connecting the Bluetooth device
1� Push [MENU]�
2�
Push [▲]/[▼] to select “Settings,” and then push [ENT
]�
3�
Push [▲]/[▼] to select “Bluetooth,” and then push [ENT
]�
4�
Push [▲]/[▼] to select “Search Device,” and then push [ENT
]�
• The transceiver searches for a Bluetooth device�
•
If found, the device’s name is displayed on the screen.
(Example: ICOM BT-002)
L
Push [ CLR] to cancel searching�
L
If “Failed” is displayed, confirm that the headset is in the Pairing mode, and then retry
searching�
5�
Push [▲]/[▼] to select the headset to pair and connect,
and then push [ENT ]�
6�
Push [▲]/[▼] to select “Pairing,” and then push [ENT
]�
• “Pairing Successful” is displayed when the pairing has been completed�
• “
✔
” is displayed at the left of the connected device name�
7� Push [MENU]�
• Exits the MENU screen�
• “ ” is displayed when the headset is connected to the transceiver�
NOTE:
• You may not find a target Bluetooth device if there are many other Bluetooth
devices nearby� In that case, stop using those devices, or move away from them�
• If the Bluetooth device is disconnected, the audio is output from the
transceiver. Be sure not to set the transceiver’s volume level too high.
TIP: How to automatically connect to the paired device
The transceiver automatically connects to the paired device when:
• The Bluetooth function is ON�
• No other Bluetooth device is connected to the transceiver�
• The paired device is ON�
• “Auto Connect” is set to “ON�” (p� 4-3)
L
“ ” is displayed when the headset is connected to the transceiver�
[MENU]
[ENT
]
[▲]/[▼]