![background image](http://html1.mh-extra.com/html/icom/ip110h/ip110h_operating-manual_2038205005.webp)
1
BEFORE USING
1-3
Turning ON the transceiver
Adjusting audio output level
z
Hold down [ ] for 2 seconds�
• A beep sounds�
z
Push [▲]/[▼] to adjust the audio output level.
L
The volume can be adjusted between 0 and 32�
NOTE:
The explanations in this guide assume
that the registration on the Controller has been
completed� If no Standby screen is displayed, ask
your system manager�
L
The signal strength is displayed in 1 to 3 levels�
A beep may sound when it goes out of, or enters
into the service area, depending on the Controller
setting�
NOTE:
If the output level is set to 0, the received
audio and beep do not sound�
Standby screen