1
BEFORE USING
1-4
Panel description
NOTE:
Instructions and screens on this guide may
differ, depending on the Controller settings�
L
The USB connector does not support USB Power
Delivery (USB PD)�
Clip cover
Jack cap
Status indicator
USB connector
(Type-C)
[MENU]
[ENT
]
[▲]/[▼]
[PTT]
Speaker
Function
display
Microphone
[ ]
[ CLR]
Operating keys
[PTT] switch
Hold down to transmit, release to receive�
[ ] key
Hold down for 2 seconds to turn the transceiver ON or
OFF�
[ CLR] key*
• In the Standby screen, push to display the ID List
screen�
L
May be usable, depending on the Controller setting�
• In the MENU screen, push to return to the previous
screen�
[▲]/[▼] key
• In the Standby screen, push to adjust the audio
level�
• In the MENU screen, push to select a setting item
or value�
[ENT ] key
• In the Standby screen, hold down for 1 second to
turn the Key Lock function ON or OFF�
• In the MENU screen, push to set the selected item
or option�
[MENU] key*
• In the Standby screen, push to display the MENU
screen�
• In the MENU screen, push to go back to the
Standby screen�
* One of the functions described on page 3-9 may
be assigned to the key, depending on the Controller
setting� Hold down the key for 1 second to use the
assigned function�
When connecting optional equipment:
• Be sure to turn OFF the transceiver before
connecting or disconnecting optional equipment to
or from the jack�
• Insert the plug securely when connecting the cable�
• Remove the cable by holding the plug, not the cable�
CAUTION:
Attach the jack cap when no optional
equipment is connected�
3
3
1
1
2
2
4
4
L
Use a coin or standard screwdriver
to protect your fingernails�
Jack cap
About the Status indicator
• Lights red while transmitting�
• Lights green while receiving a call�
• Lights yellow while making a call in the Full Duplex
mode�