![background image](http://html1.mh-extra.com/html/icom/ip110h/ip110h_operating-manual_2038205028.webp)
3
ADVANCED OPERATION
3-14
Emergency Call function
When the transceiver is tilted past the preset angle for
the ON Timer preset time, the transceiver enters the
Emergency mode�
L
If you raise the transceiver back from the preset angle
towards the vertical position before the Reminder Timer
preset time expires, the Emergency mode is canceled.
NOTE:
The Man Down function may not properly work, depending on the surrounding environment such as
the battery capacity, the signal strength, or the access point or network status. Icom is not responsible for the
destruction or damage caused by using the Man Down function�
D
Man Down function
The transceiver may enter the Emergency mode through the following functions, depending on the Controller
setting�
Man Down with Stationary
The transceiver enters the Emergency mode when:
• The transceiver leans past the preset angle for the
ON Timer preset time�
AND
• The transceiver is detected as stationary (no
motion) for the ON Timer preset time�
L
If you raise the transceiver back from the preset angle
towards the vertical position, or move the transceiver
before the Reminder Timer preset time expires, the
Emergency mode is canceled�
Angle
Time
Past the preset degrees
ON Timer
Reminder Timer
Emergency Timer
Enters the
Emergency mode�
Sends an
Emergency call�
Preset angle
If raised back from the preset
angle during the Reminder
Timer, the Emergency mode is
canceled�
If raised back from the preset
angle during the Reminder
Timer, the Emergency mode is
canceled�
Angle
Acceleration
Time
Enters the
Emergency mode�
Sends an
Emergency call�
Stationary
Sensitivity
ON Timer
Reminder Timer
Emergency Timer
Preset angle
If moved during the Reminder
Timer, the Emergency mode is
canceled�
No motion is
detected�
Past 45 degrees
Example
Preset angle: 45 degrees