![background image](http://html1.mh-extra.com/html/icom/ic-m94de/ic-m94de_instruction-manual_4733573037.webp)
28
9
DSC OPERATION
9
10
15
18
13
11
16
14
12
17
1
7
4
2
8
5
3
6
■
Sending DSC calls (other)
NOTE:
To ensure proper DSC operation, be sure to correctly adjust the “CH 70 SQL
Level” item on the Menu screen. (p. 43)
D
Sending an Individual call
An Individual call enables you to send a DSC signal to only a specific station. You can
communicate after receiving the Acknowledgement “Able to comply.”
1. Push
.
•The “Compose Other” screen is displayed.
L
You can also display the “Compose Other” screen by
selecting the “Compose Other” item on the Menu screen.
2. Select “Message Type,” and then push [ENT].
3. Select “Individual,” and then push [ENT].
•Returns to the “Compose Other” screen.
4. Select “Address,” and then push [ENT].
5. Select the station to send an Individual call to, and then
push [ENT].
•Returns to the “Compose Other” screen.
L
You can also select “Manual Input” to manually enter the
target station ID.
6. Select “Channel,” and then push [ENT].
7. Select a channel to assign, and then push [ENT].
L
The assigned channels are preset by default.
8. Push
to send the Individual call.
•“Transmitting Individual Call” is displayed, and then “Waiting
for ACK” is displayed.
L
If Channel 70 is busy, the transceiver stands by until the
channel becomes clear.
9.
When you receive an Acknowledgement “Able to comply”:
•An alarm sounds.
•The screen to the right is displayed.
10. Push
to turn OFF the alarm.
•The channel assigned in step 7 is automatically selected.
L
If the called station cannot use the channel that you
assigned, a different channel is selected by the other
station.
11.
Hold down [PTT] to communicate.
TIP:
If you received an Acknowledgement “Unable to
comply”:
1. Push
to turn OFF the alarm.
•
The Acknowledge information is displayed.
2. Push
, and then
to return to the
operating screen.
Summary of Contents for IC-M94DE
Page 86: ...MEMO...
Page 87: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO...