![background image](http://html1.mh-extra.com/html/icom/ic-m94de/ic-m94de_instruction-manual_4733573056.webp)
47
10
AIS RECEIVER
■
Using the AIS list screen
There are 3 types of AIS lists, Target, Danger, and Friends.
1. Push [MENU].
•
The Menu screen is displayed.
2. Push [▲] or [▼] to select “AIS,” and then push [ENT].
•
The “AIS” screen is displayed.
3. Push [▲] or [▼] to select a list, and then push [ENT].
•
The list screen is displayed.
4. Push [▲] or [▼] to select an AIS target.
5. Push the Software Key below for your next operation.
:
(DSC)
Displays the “Compose Other” screen to send
L
Displayed only when a target is selected.
L
May not be displayed, depending on the
selected target.
:
(Navigation)
Starts navigation to the selected target.
:
(Friend)
Sets the selected target as a Friend. (p. 49)
L
Displayed only in the Target List or Danger
List.
:
(Detail)
Displays the details on the selected target.
L
Displayed only when the target is selected.
:
(Plotter)
Displays the selected target on the plotter
:
(Sort)
Sorts the Danger target data by CPA or TCPA.
L
Displayed only in the Danger List.
NOTE:
An alarm sounds when an AIS target is closer than
the CPA and TCPA settings, and so on, depending on the
presetting. To stop the alarm buzzer, push any key.
L
If the popup screen is displayed, push any key again to turn it
OFF.
Summary of Contents for IC-M94DE
Page 86: ...MEMO...
Page 87: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO...