![background image](http://html1.mh-extra.com/html/icom/ic-m94de/ic-m94de_instruction-manual_4733573080.webp)
71
13
SPECIFICATIONS AND OPTIONS
■
Using the HM-165
Alligator type clip
To attach the speaker microphone
to your shirt or collar.
PTT switch
Push to transmit.
Release to receive.
Microphone
Speaker
Turn OFF the transceiver
when connecting the HM-165.
NOTE:
•
NEVER
immerse the connector in water. If the connector becomes wet,
BE SURE
to
dry it before attaching to the transceiver.
•
The microphone element is located at the top of the speaker microphone, as shown in
the illustration above. To maximize the readability of your transmitted audio, hold the
microphone approximately 5 ~ 10 cm (2 ~ 4 inches) from your mouth, and then speak
at your normal voice level.
•
If the audio sound becomes muffled, remove any water that may be inside the speaker
grill and/or microphone hole.
•
The DSC alarms sound from the transceiver, even while the speaker microphone is attached.
D
Attaching the HM-165
1. Turn OFF the power.
2. Insert the speaker microphone connector into the connector and securely screw it, as
shown below.
L
Be careful not to cross-thread the connection.
NOTE: KEEP
the jack cover attached when the speaker microphone is not used. If the
cover is not attached, water will get into the transceiver. Moreover, the terminals (pins)
will become rusty, or the transceiver will function abnormally if the connector gets wet.
CAUTION:
Attach the speaker microphone connector securely to
prevent accidental loss, or water intrusion into the connector.
Detaching:
Rotate the jack cover counter-
clockwise, and then detach it.
Attaching:
Attach the jack cover, and then
rotate it clockwise completely.
Summary of Contents for IC-M94DE
Page 86: ...MEMO...
Page 87: ...1 7 4 10 15 18 2 8 13 5 11 16 3 9 14 6 12 17 MEMO...