3-7
Optional Internal Unit Installation
¾
IC F9511HT
This is the instruction on how to install the UT 125
¾
IC-F9511HT
1
Unscrew 6 screws from the top cover, and remove
the top cover, seal plate and main cover.
2
Remove 2 cushions from the MAIN UNIT.
This is the instruction on how to install the UT-125,
UT-128 encryption unit to the transceiver.
UT-125
UT-128
▒
CAUTION! Optional unit installation should be done
▒
at an authorized Icom service center only.
ENCRYPTION UNIT INSTALLATION
AES/DES
Encryption
Unit
DES
Encryption
Unit
3
Attach the unit as illustrated below.
¾
IC-F9511S, IC-F9511T
1
Unscrew 4 screws, A, then remove the bottom
cover.
2
Unplug J1(B) and J6 (C; F9511S only).
3
Unscrew 2 screws, D.
4
Remove the front panel in the direction of the
arrows.
Cushion
UT-125
or
UT-128
Bottom cover
4
Recover the transceiver, and set or modify the
setting using optional cloning software.
▒
These instructions on how to install the units can
Front panel
(F9511S only)
▒
be referred to in the service manual .
5
Attach the unit to "J2" as below.
24
6
Recover the transceiver, and set or modify the
setting using optional cloning software.
