4-1
Operation and Function
4-1-1
Operation and Function
IC-F9511S, IC-F9511T
▒
NOTE : Operation of the IC-F9521/F9523/S/T is also based on this instruction.
10 keypad
model
Up/Down Key
Si
l d l
➊
AF VOLUME CONTROL KNOB
Rotate the knob to adjust the audio output level.
• Minimum audio level is pre-programmed.
➑
DEALER-PROGRAMMABLE KEYS
Desired functions can be programmed independently
by your dealer. In this instruction manual, these keys
are from the left called [P0]/[P1]/[P2]/[P3]/[P4]
Simple model
Dial Key
➋
FUNCTION DISPLAY
Displays a variety of information, such as an operating
channel number/name, DTMF numbers and audible
condition, etc.
➌
UP/DOWN or DIAL KEYS
• 10-key model: UP/DOWN Keys
are from the left, called [P0]/[P1]/[P2]/[P3]/[P4].
➒
MICROPHONE CONNECTOR
Connect the supplied or optional microphone.
• When you connect a microphone, be sure to fit the
connector cover of the microphone into the
connector to maintain the front panel’s dust
protection and splash resistance*.
*Only when the optional RMK-2 is attached.
Push to select an operating channel, etc.
• Simple model: DIAL
Rotate to select an operating channel, etc.
*The desired function can be assigned by your
dealer.
➍
10-KEYPAD (10-key model only)
The keypad allows you to enter digits to:
S l t
h
l t
h
l
d DTMF
y
p
RMK-2
Connector cover
• Select memory channels, tone channels and DTMF
codes (when in the DTMF code channel selection
mode)
• Start up with a password
• Input the Individual ID code for digital operation.
(Depending on the pre-set value)
➎
BUSY INDICATOR
Lights green while receiving a signal or when the
▒
NEVER connect non-specified microphones.
▒
The pin assignments may be different and the
▒
transceiver may be damaged.
MICROPHONE
The supplied microphone has a PTT switch and a
hanger hook.
Lights green while receiving a signal, or when the
squelch is open.
➏
POWER SWITCH [POWER]
Push to turn the power ON and OFF.
• The following functions are available at power ON as
options:
➣
Automatic scan start
➣
Password prompt
• The following functions are available when the
microphone is on or off hook (depending on the
setting):
➣
Automatic scan starts when it is on hook.
➣
Scan is cancelled when it is off hook.
➣
Scan is paused when it is off hook.
➣
Automatic priority channel selection is available
when it is off hook.
26
➣
Password prompt
➣
Set mode
➐
TRANSMIT INDICATOR
Lights red while transmitting.
* P25 operation only
➣
Sets to ‘Inaudible’ condition (mute condition)
when it is on hook.
➣
Sets to ‘Audible’ condition (unmute condition)
when it is off hook.