Tactical Group Function
▒
NOTE: When the “DEALER” indication does not
▒
NOTE: When the DEALER indication does not
▒
clear after entering 6 digits, the input code
▒
number may be wrong. In that case, turn the
▒
power OFF, and start over.
▒
NOTE: A default passcode is “159357”;
▒
Push [P1], [P0], [P4], [P3], [P0], [P2] in sequence.
5
If “SETMODE” i di l
d f
i h d l
Mobile to Mobile connection
5
If “SETMODE” is displayed after entering the dealer
passcode, push [P3].
• “CLONE” is displayed.
6
Push [CH Up] or [CH Down], or rotate [CH
Up/Down] to select “TACTICAL.”
7
Push [ ] to copy zone 128 data of the master
transceiver, to zone 128 of the sub transceiver.
Handheld to Mobile connection
▒
NOTE: If [ ] is pushed when “CLONE” is
▒
displayed, the regular cloning operation is
▒
performed (all data, including zone 128, of the
▒
master transceiver is written to the sub
▒
transceiver).
▒
For actual appearance of the cables, please
▒
refer to
3-5 Optional Accessories
.
Cloning the tactical group
<Master (Zone 128)
➔
Sub (Zone 128)>
(Continued)
2
Turn the sub transceiver power ON.
3
Set the master transceiver into the set mode as
follows;
While pushing [P0] and [P4] on the master
transceiver, push [ ] to turn the power ON.
• “DEALER” is displayed.
4
Input the 6 digit dealer passcode, as specified by
your dealer.
• The 10-keypad* can be used for pass code
input.
p
* 10-key models only
• When using a Simple model transceiver, the
keys in the table shown below can be used for
pass code input.
• The transceiver detects numbers in the same
block as identical. Therefore 0 and 5, 1 and 6,
etc. are the same.
58
