Programmable function keys
SCAN B START/STOP KEY
4-1-3
Programmable Function Keys
IC-F9511S/T,F9521S/T,F9523S/T
Programmable function keys
The following functions can be assigned to [DIAL]*,
[UP], [DOWN], [P0], [P1], [P2], [P3] and [P4]
programmable function keys. Consult your Icom
dealer or system operator for details concerning your
transceivers programming.
If the programmable function names are bracketed
SCAN B START/STOP KEY
➥
Push to start and cancel scanning operation.
The scan restarts after the specified time
period has passed when the scan (started
with this key) is cancelled by this key
operation.
➥
Push and hold this key for 1 sec to indicate
the scan list, then push [CH Up] or [CH Down]
t t [CH U /D
]* t l t th
If the programmable function names are bracketed
in the following explanations, the specific key is used
to activate the function depends on the
programming.
* The functions you can assign to [DIAL] are
limited.(Only functions marked with
✩
can
be assigned.)
✩
CH UP AND DOWN KEYS
or rotate [CH Up/Down]* to select the
desired list.
SCAN ADD/DEL (TAG) KEY
Push to add or delete the selected channel to/from
the scan list.
1
Push to indicate the scan list, then push [CH
Up] or [CH Down] or rotate [CH Up/Down]
✩
CH UP AND DOWN KEYS
➥
Push (or Rotate)* to select an operating
channel.
➥
Push (or Rotate)* to select a scan group after
pushing and holding [Scan A
Start/Stop]/[Scan B Start/Stop].
* Rotate when this function is assigned to [DIAL].
* to select the desired list.
2
Push to add or delete the channel to/from
the selected scan list.
3
Push and hold for 1 sec to exit the scan list
selection mode.
PRIO A/B KEYS
➥
Push to select Priority A or Priority B channel.
✩
ZONE UP AND DOWN KEY
(This function is for [DIAL] only)
Rotate to
select the desired zone.
ZONE KEY
Push this key, then push [CH Up] or [CH Down] or
rotate [CH Up/Down]* to select the desired zone.
us to se ect
o ty o
o ty c a e
➥
Push and hold [Prio A (Rewrite)] or [Prio B
(Rewrite)] for 1 sec to rewrite the operating
channel as the Priority A or Priority B channel.
MR-CH 1/2/3/4 KEYS
Push to select the memory channel 1 to 4 directly.
MONI KEY
▒
What is “zone”?—The desired channels are
▒
assigned into a zone according to the intended
▒
use for grouping. For example, ‘Staff A’ and
▒
‘Staff B’ are assigned into a “Business” zone,
▒
and ‘John’ and ‘Cindy’ are assigned into a
▒
“Private” zone.
SCAN A START/STOP KEY
MONI KEY
➥
Mute and release the CTCSS (DTCS), NAC or
Talkgroup ID squelch mute. Open any
squelch/deactivate any mute while pushing
this key.
➥
Depending on the pre-set value, pushing and
holding this key for 1 sec cancels the scan.
For the IC-F9511S/T, this function is not
il bl i t
i
ith
i i
SCAN A START/STOP KEY
➥
Push to start and cancel scanning operation.
• When Power ON Scan function is activated,
push to pause the scanning operation. And the
paused scan resumes after the specified time
period has passed.
➥
Push and hold this key for 1 sec to indicate
th
li t th
h [CH U ] [CH D
]
available in transceivers with a revision
number of 1.2 or lower.
TALK AROUND KEY
(Conventional operation only)
Turn the talk-around function ON and OFF.
• The talk around function equalizes the
transmit frequency to the receive frequency
28
the scan list, then push [CH Up] or [CH Down]
or rotate [CH Up/Down]* to select the desired
list. (Available depending on the presetting.)
for transceiver-to-transceiver communication.