Icom IC-F9511T, User Manual

Page: 20 / 87

3-3 D-Sub 25 Pin Configuration
D-sub accessory connector
The IC-F9511 series has a D-SUB 25 pin ACC
connector for connecting various external devices.
D-SUB 25 Pin Configuration D SUB 25 Pin Configuration
Pin No. Pin Name Description
1 H_OUT2 22W Hi Power AMP BTL Output
2 TXD Serial Data Output *Built-in RS-232C Interface
3 RXD Serial Data Input *Built-in RS-232C Interface
4 RTS Request To Send Input for Internal RS-232C Interface
5 CTS Clear To Send Input for Internal RS-232C Interface
There are 8 pins that can be assigned the function
you need. These are the default setting of 8 pins.
6 DSR Connected to Pin20
7 GND Ground
8 EXMOD Modulation Input
9
DISC
OUT
Demodulation Signal Output
10 HORN Horn Selection Signal Output
11 VCC DC Voltage Output
Port No. Port set No. In/Out Function
10 - Output Horn
12 PIN01 Input Mic Mute
15 PIN02 Input -
17 PIN03 Output Busy
18 PIN04 Output Digital Audible
19 PIN05 Input EPTT
21 PIN06 Output Analog Audible
12 PI01 Port setting (MIC Mute Input )
13 H_OUT1 22W Hi Power AMP BTL Output
14 GND Ground
15 PIO2 Port setting
16 NC No connection
17 PI03 Port setting
18 PI04 Port setting
p g
23 PIN07 Output Mic Mute
24 - Input Dimmer
25 PIN08 Output Hanger
Th d f lt tti g b h g d t th f ti
12
15
17 18 19 21 23 25
19 PI05 Port setting (EPTT Input)
20 DTR Connected to Pin6
21 PI06 Port setting (Analog Audible Output)
22 PA AF Amp Signal Input
23 PI07 Port setting
24 DIMO DIMMER Control Input
25 PI08 Port setting
Function
Null
Function
Null
P2 Monitor
These default settings can be changed to the function
you want.
1
Select Input or Output at In/Out.
2
Select the function you need.
Input
Output
Null
MCH Select : 1
MCH Select : 2
MCH Select : 3
MCH Select : 4
MCH Select : 5
Mic Mute
Busy P3 Monitor
Analog Audible P4 Monitor
Digital Audible
Ext.CH Mode
Mic Mute
Hanger
TX
Horn
The pins (No. 12, 15, 17, 18, 19, 21, 23 and 25 ) can be
customized to your required function in cloning
software.
Please set up the cloning software and proceed to Port
Setting of the External I/O and you can see the
20
EPTT
Dimer
Ext.Key
Horn
P0 Monitor
P1 Monitor
Setting of the External I/O and you can see the
following Port Setting Window.