![background image](http://html2.mh-extra.com/html/icom/ic-f3262dt/ic-f3262dt_operating-manual_4245690005.webp)
D
For both BIIS 1200 and dPMR operations
The following key functions are useful for BIIS 1200 and dPMR
operations.
STATUS UP, STATUS DOWN
“
STUP
” “
STDN
”
➥
Push to select a status message.
➥
When the automatic scroll function is activated, push to
cancel it, if desired.
➥
When an SDM that includes more than 12 characters is
displayed, push to manually scroll the message.
STATUS
“
STAT
”
➥
Push to enter the status message selection mode.
• Push
[CH Up]
or
[CH Down]
to select a desired message.
➥
Hold down for 1 second to transmit the last selected status
message.
MESSAGE
“
MSG
”
➥
Push to enter the SDM selection mode.
• Push
[CH Up]
or
[CH Down]
to select a desired SDM.
➥
While in the SDM selection mode, hold down for 1 second
to transmit the last selected SDM.
➥
While in the stand-by mode, hold down for 1 second to
enter the message editing mode. (dPMR only)
• Set a desired message using the 10-keypad. (Only 10-key version)
(p.22)
In BIIS 1200 operation, status messages and SDM are
selectable in the same mode.
D
Additional key functions
• For both BIIS 1200 and dPMR operations
The following key functions are recommended for BIIS 1200
and dPMR operations, and function as described below.
CALL
“
CALL
”
➥
On an MSK channel, push to transmit a BIIS call.
➥
On a digital channel, push to transmit a dPMR call.
Depending on the preprogrammed settings, pushing
[PTT]
makes a call in the same way as using
[Call]
. Moreover,
when you keep holding down
[PTT]
after receiving an
acknowledgement, you can start a conversation without
pushing it again.
TX CODE ENTER
“
TXCE
”
Push to enter the ID code edit mode, and then set a desired
ID code. (pp. 7, 18)
• For only BIIS 1200 operation
The following key function is required for BIIS 1200 operation,
and functions as described below.
MONITOR (AUDIBLE)
“
MON
”
After communication is finished, push this key to send a ‘Clear
down’ signal to terminate the connection.
Depending on the preprogrammed settings, the Priority A
channel is automatically selected after a ‘Clear down’ sig-
nal terminates a connection.
2
1
PREPARATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16