11
2
BIIS 1200 OPERATION
■
Position data transmission
Only transceiver versions with the GPS unit installed can
transmit position data.
The longitude and latitude position data can be automatically
transmitted when:
• When Status 24 (GPS request) is received.
• When
[PTT]
is released.
- Set the ‘Send with Logoff’ item to “Enable.”
• After sending a status message.
- Set the ‘Send with Status’ item to “Enable.”
• After sending an SDM.
- Set the ‘Send with SDM’ item to “Enable.”
• After sending Status 22 (Emergency).
- Set the ‘Send with Emergency’ item to “Enable.”
• After sending an Emergency call with the Man Down func-
tion.
- Set the ‘Send at ManDown’ item to “Enable.”
• By the Automatic Position Data Transmission function.
When the function is activated, the transceiver auto-
matically transmits position data according to the ‘Time
Marker’ and ‘Interval Timer’ settings.
- Set the ‘Auto’ item to “Enable.”
■
Man Down Emergency Call
Depending on the transceiver’s version, this function is not
available.
When the transceiver has been left in a horizontal position
for a specified time period*, the transceiver enters the emer-
gency mode, and then a countdown starts.
After the specified time period* has passed, an emergency
call is automatically transmitted once, or repeatedly. (See the
previous page for details.)
If the transceiver is placed in a vertical position before the
first transmission, the transceiver exits the emergency mode
and the emergency call is cancelled.
* Depending on the presetting. Ask your dealer for details.
■
Stun function
If a call is received with a specified ID, set as the killer ID, the
stun function is activated and the transceiver is disabled. In
that case, entering the password is necessary to reactivate
the transceiver.
