14
3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Receiving a Group call
When a Group call is received:
q
• Rings sound.
• “
” appears and the mute is released.
• “
” appears or blinks, depending on the preprogrammed set-
tings.
• The Talkgroup ID (or name) and the calling station’s ID (or name)
blink.
• When an All Call is received, “
ALL CALL
” blinks instead of “
TG
”
and the Talkgroup ID.
w
While holding down
[PTT]
, speak into the microphone at
your normal voice level.
NOTE:
Only one station is allowed to speak at the
same time.
Release
e
[PTT]
to receive.
r
After the communication is finished, push
[Clear]
to send
a ‘Disconnect’ signal to terminate the connection.
• Either station can send a ‘Disconnect’ signal.
• “
” disappears, “
CLR DOWN
” appears for approximately 2 sec-
onds, and the transceiver automatically returns to the stand-by
mode.
D
Receiving a status message
When a status message is received:
q
• Rings sound.
• The calling station’s ID (or name) and the status message
blink.
Push
w
[Clear]
to return to the stand-by mode.
dPMR CALL TXCE CLR
ID 0000001
TG 0100000
Calling station’s ID
Talkgroup ID
Appears Appears or blinks
dPMR CALL TXCE CLR
ID 0000001
RX Status 00
Calling station’s ID
The received
status message
