20
3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
D
Transmitting a status message
You can send a preprogrammed status message to an indi-
vidual station or to group stations.
There are 32 status messages that can be sent.
Push
q
[dPMR Button]
to enter the ID selection mode.
• The preprogrammed ID is displayed.
Push
w
[CH Up]
or
[CH Down]
to select a desired Individual
ID or Talkgroup ID.
Push
e
[dPMR Button]
again to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
Push
r
[dPMR Button]
again to enter the status message
selection mode.
• The preprogrammed status message is displayed.
Push
t
[CH Up]
or
[CH Down]
to select a desired status
message.
y
Push
[Call]
to transmit the status message to the selected
station or talkgroup.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
u
After a specified time period, the transceiver will return to
the stand-by mode.
dPMR CALL TXCE CLR
Status 01
TX Status 01
