![background image](http://html2.mh-extra.com/html/icom/ic-f3262dt/ic-f3262dt_operating-manual_4245690029.webp)
26
3
dPMR OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
■
Position data transmission
Only transceiver versions with the GPS unit installed can
transmit position data.
The longitude and latitude position data can be automatically
transmitted when:
• When the GPS Request status message is received.
- Set a status message as the GPS Request one in the ‘GPS
Request Status’ item.
• At the end of a Voice call.
- Set the ‘Send with Voice Call’ item to ‘Enable.’
• After sending a status message.
- Set the ‘Send with Status Call’ item to “Enable.”
• After sending an SDM.
- Set the ‘Send with SDM Call’ item to “Enable.”
• After making an Emergency call.
- Set the ‘Send with Emergency’ item to ‘Enable.’
• After sending an Emergency call with the Man Down function.
- Set the ‘Send at ManDown’ item to “Enable.”
• By the Automatic Position Transmission function.
When the function is activated, the transceiver auto-
matically transmits position data according to the ‘Time
Marker’ and ‘Interval Timer’ settings.
- Set the ‘Auto’ item to “Enable.”
■
Man Down Emergency Call
Depending on the transceiver’s version, this function is not
available.
When the transceiver has been left in a horizontal position
for a specified time period*, the transceiver enters the emer-
gency mode, and then a countdown starts.
After the specified time period* has passed, an emergency
call is automatically transmitted once, or repeatedly. (See the
page 23 for details.)
If the transceiver is placed in a vertical position before the
first transmission, the transceiver exits the emergency mode
and the emergency call is cancelled.
* Depending on the presetting. Ask your dealer for details.