![background image](http://html2.mh-extra.com/html/icom/ic-f3262dt/ic-f3262dt_operating-manual_4245690027.webp)
24
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
2
3
dPMR OPERATION
24
■
Transmitting a command
The following Individual calls allow you to send special com-
mands. These calls will function if you are designated as a
specific station. Ask your dealer for details.
D
Transmitting an Ambience Listening Call
An Ambience Listening call allows you to send a command
that will require the target station to transmit its microphone
audio.
Push
q
[dPMR Button]
to enter the ID selection mode.
• The preprogrammed ID is displayed.
Push
w
[CH Up]
or
[CH Down]
to select a desired Individual
ID.
Push
e
[dPMR Button]
again to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
Push
r
[CH Up]
or
[CH Down]
to select “
LISTENING
.”
t
Push
[Call]
to transmit an Ambience Listening call to the
selected station.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received, then
the called station’s microphone audio can be heard for the pre-
programmed time period.
• “
FAILED
” is displayed when no acknowledgment is received.
After a specified time period, the transceiver will return to
y
the stand-by mode.
D
Transmitting a Stun Call
A Stun call allows you to send a command that will stun the
target station.
Push
q
[dPMR Button]
to enter the ID selection mode.
• The preprogrammed ID is displayed.
Push
w
[CH Up]
or
[CH Down]
to select a desired Individual
ID.
e
Push
[dPMR Button]
again to enter the application selec-
tion mode.
• “
STATUS
” is displayed.
Push
r
[CH Up]
or
[CH Down]
to select “
STUN
.”
Push
t
[Call]
to transmit a Stun call to the selected station.
• “
WAIT
” is displayed while transmitting.
• “
OK
” is displayed when an acknowledgement is received.
• “
FAILED
” is displayed when no acknowledgment is received.
y
After a specified time period, the transceiver will return to
the stand-by mode.