![background image](http://html2.mh-extra.com/html/icom/ic-f3262dt/ic-f3262dt_operating-manual_4245690020.webp)
17
3
dPMR OPERATION
■
Receiving a call (continued)
D
Displaying a received call log entry
Depending on the preprogrammed setting, the transceiver
stores up to 10 call log entries. Individual Voice, Status and
SDM call log entries are stored. When an 11th call is re-
ceived, the oldest call log entry will be removed, and the last
received call will be added. When the transceiver is turned
OFF, all the log entries are deleted.
Push
q
[dPMR Button]
twice to enter the application selec-
tion mode.
• “
STATUS
” appears.
Push
w
[CH Up]
or
[CH Down]
to select “
CALL LOG
.”
Push
e
[dPMR Button]
again to display a call log entry.
Push
r
[CH Up]
or
[CH Down]
to display a desired entry.
• If a Status or SDM call log entry is selected, not only the calling
station’s ID but also the status message or message are dis-
played.
Push
t
[dPMR Button]
again to return to the stand-by
mode.
NOTE:
Depending on the preprogrammed settings, push-
ing
[Call]
while displaying a call log entry makes a Voice
call using the entry’s ID. However, if a Status or SDM call
log entry is selected, the transceiver makes a Voice call
using the last selected Individual or Talkgroup ID.
dPMR CALL TXCE CLR
VOICE
0000001
dPMR CALL TXCE CLR
NO LOG
When the transceiver
has a call log entry
When the transceiver
has no call log entries