Icom IC-A210E, Instruction Manual

Page: 20 / 40

16
3
MEMORY OPERATION
n
Programming channel tag
(Group memory channel only)
The tag name can be set a three character name in addition
to the group number. It is convenient for separating memory
type.
q
Push [RCL] , then rotate [O-DIAL] to select the desired
group memory channel in the memory mode.
• Rotate [O-DIAL] to select the memory channel type if neces-
sary.
w
Push [MEM] , then rotate [O-DIAL] to select “CH TAG”
when selecting “LABEL” in “Group memory channel dis-
play” of the menu mode (p. 22).
e
Push [MEM] , then rotate [DIAL] to select the desired
channel tag.
• The tag type as shown below is selectable.
r
Push
[MEM]
to set the channel tag.
• Selectable tags
___ / TWR / GND / ATS / ATF / APP / ARR / AWS / CLR /
CTF / DEP / FSS / RFS / UNI / MF / OTH / U-1 / U-2
n
Channel tag list
*
1
Group memory, *
2
GPS memory
CH01
127.00
5
122.00
RX GRP01
TWR
TAG
NAME
DISPLAY
MEANS
Group* 1 GPS* 2
_ _ _ YES – Non-tag
TWR YES YES Tower
GND YES YES Ground
ATS YES YES ATIS
ATF YES YES Air traffic
APP YES YES Approach
ARR YES YES Arrival
AWS YES YES Automatic Weather Station
CLR YES YES Clearance / Delivery
CTF YES YES Common Traffic Advisory Frequency
DEP YES YES Departure Frequency
FSS YES YES Flight Service Station
RFS YES YES Remote Flight Service Station
UNI YES YES Unicom frequency
MF YES YES Mandatory frequency
OTH YES – Other
U-1 YES – User1 setting (Refer to page 24)
U-2 YES – User2 setting (Refer to page 24)