Icom IC-A210E, Instruction Manual

Page: 28 / 40

24
5
MENU MODE
n
MENU mode items (Continued)
D Frequency Display “FREQ DISP”
Set the 1 kHz digit frequency displaying in the OLED.
• OFF : The 1 kHz digit is not displayed in the OLED.
• ON : The 1 kHz digit is always displayed in the OLED.
• ZERO SUPP. : The 1 kHz is digit display on the OLED as 0.
D USER-1 Setting
“U-1 ID SET”
Set the USER-1, channel tag, to the desired ID.
q
Push [MEM] to enter the U-1 ID edit mode.
w
Rotate [DIAL] to select the desired character.
e
Rotate [O-DIAL] to select the next input digit.
r
Repeat
w
–
e
to input the U-1 ID.
t
Push [MEM] again to store the U-1 ID, and exit the edit
mode.
D USER-2 Setting
“U-2 ID SET”
Set the USER-2, channel tag, to the desired ID.
q
Push [MEM] to enter the U-2 ID edit mode.
w
Rotate [DIAL] to select the desired character.
e
Rotate [O-DIAL] to select the next input digit.
r
Repeat
w
–
e
to input the U-2 ID.
t
Push [MEM] again to store the U-2 ID, and exit the edit
mode.
D External Input
“AUX IN”
Set the external input mode.
• OFF : The external input is OFF.
• ON : The external input is available while the squelch is
closed.
• INCOM : The external input is available with the intercom op -
erations as following.
- The intercom function is OFF.
- While the intercom function is not in use.
- While an audio signal is not input into the intercom’s
microphone.
D External Input Level “AUX LEVEL”
Set the external input level.
• OFF (0) : The external input does not operate.
• 001 to 080 : Sets the external input level from 1 to 80.
• AF GAIN : Interlocked with [VOL].