Icom IC-A210E, Instruction Manual

Page: 32 / 40

28
8
SPECIFICATIONS
D General
• Frequency range : 118.000 to 136.975 MHz
• Channel spacing : 25 kHz or 8.33 kHz
• Frequency stability : ±1 ppm (0˚C to +40˚C)
• Operating temperature : –20˚C to +55˚C
• Antenna impedance : 50 ø
• Number of memory channels : 10 memory channels
200 group channels
10 history channels
10 GPS channels
• Mode : AM (6K00A3E/5K60A3E)
• Power supply requirement : 13.80 V / 27.50 V DC
(negative ground)
• Dimensions : 160 (W)
5
34 (H)
5
271 (D) mm
(projections not incl.)
• Weight (approximately) : 1.0 kg
D Transmitter
• Mode : AM
• Output power : 6 W (Carrier power)
• Spurious emissions : –36 dBm (harmonics)
• Microphone impedance : 600 ø
• Modulation limiting : 85% (Max 98%)
• Transmitter intermittent : 1 minute (Transmitter ON)
duty cycle 3 minutes (Transmitter OFF)
D Receiver
• Receive system : Double conversion
superheterodyne
• Intermediate frequencies : 1st 38.85 MHz
2nd 450 kHz
• Sensitivity : Less than 2 µV (pd)
at 6 dB S/N
• Selectivity : • Channel spacing: 25 kHz
6 dB ±8.5 kHz
• Channel spacing: 8.33 kHz
6 dB ±2.8 kHz
• Spurious response rejc. : More than 74 dBµ
• Audio output power : 5 W with a 4 ø load (External
speaker)
60 mW with a 500 ø load
(Headphone)
All stated specifications are subject to change without notice
or obligation.