![background image](http://html2.mh-extra.com/html/icom/ic-a210e/ic-a210e_instruction-manual_3461962011.webp)
7
2
BASIC OPERATION
0
2
n
Frequency setting example
The following example shows to how to set 126.40 MHz as the standby frequency and then exchange it with the active fre-
quency indicator.
The active frequency and the standby
frequenies are exchanged.
Previously used frequencies appear.
Rotate the large tuning dial to change
the standby frequency in MHz steps.
Rotate the small tuning dial to change
the standby frequency in kHz steps.
121.80
5
134.80
RX
126.80
5
134.80
RX
126.40
5
134.80
RX
134.80
5
126.40
RX
q
Rotate
[O-DIAL]
clockwise to
select “126” MHz.
w
Rotate
[DIAL]
counterclockwise
to select “400” kHz.
e
Push
[
�
]
.
NOTE:
DO NOT
hold down
[
�
]
continuously. Otherwise the standby
frequency disappears. If this
happens, hold down
[
�
]
until the
standy frequency reappears.
STEP DISPLAY NOTE
Summary of Contents for IC-A210E
Page 1: ...iA210E VHF AIR BAND TRANSCEIVER INSTRUCTION MANUAL...
Page 34: ...30 9 ABOUT DOC...
Page 38: ...34 MEMO...
Page 39: ...35 MEMO...