manualshive.com logo in svg

Icom IC-910H, Instruction Manual, Page: 62 / 88

Share
Download
Icom IC-910H Instruction Manual Download Page 62

60

10

SET MODE

n

 FM set mode

Offset frequency for 144 MHz

Set the offset frequency for duplex (repeater) opera-
tion within 0–10.00000 MHz range.
This item is displayed when the 144 MHz band is ac-
cessed, including the SUB band access capability.
• Default value: 0.6000

FM

Offset frequency for 430(440) MHz

Set the offset frequency for duplex (repeater) opera-
tion within 0–10.00000 MHz range.
This item is displayed when the 430(440) MHz band 
is accessed, including the SUB band access capa-
bility.
• Default value: 5.0000

FM

Offset frequency for 1200 MHz

Set the offset frequency for duplex (repeater) opera-
tion within 0–100.00000 MHz range.
This item is displayed when the 1200 MHz band is 
accessed, including the SUB band access capability.
• Default value: 20.0000

FM

Tone encoder frequency for 144 MHz 

(except Europe, Sweden and Italy versions)
Select tone encoder frequency for accessing a repeat-
er, etc. from one of 50 available tone frequencies.
This item is displayed when the 144 MHz band is ac-
cessed, including the SUB band access capability.
• Default value: 88.5

FM

T

Tone encoder frequency for 430(440) MHz 

(except Europe, Sweden and Italy versions)
Select tone encoder frequency for accessing a repeat-
er, etc. from one of 50 available tone frequencies.
This item is displayed when the 430(440) MHz band is 
accessed, including the SUB band access capability.
• Default value: 88.5

FM

T

Tone encoder frequency for 1200 MHz 

(except Europe, Sweden and Italy versions)
Select tone encoder frequency for accessing a repeat-
er, etc. from one of 50 available tone frequencies.
This item is displayed when the 1200 MHz band is 
accessed, including the SUB band access capability.
• Default value: 88.5

FM

T

Summary of Contents for IC-910H

























































































Reviews:

No comments