![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497004.webp)
n
Front panel
q
POWER SWITCH [POWER]
➥
Push momentarily to turn power ON.
➥
Push for 2 sec. to turn power OFF.
w
TRANSMIT SWITCH [TRANSMIT]
Push to select transmitting or receiving.
e
COMPRESSION SWITCH [COMP] (p. 36)
Push to switch the speech compressor function ON
and OFF.
•
The speech compressor increases average RF output
power, improving signal strength and readability in SSB.
r
VOX SWITCH [VOX] (p. 33)
Push to switch the VOX function ON and OFF.
• The VOX (Voice-Operated Transmission) function tog
-
gles between transmit and receive with your voice. This
function provides an opportunity to input log entries into
your computer, etc., while operating.
t
HEADPHONE JACK [PHONES]
Accepts headphones.
• Output power: 5 mW with 8–16
Ω
load.
• When headphones are connected, the internal speaker
or connected external speaker does not function.
• The MAIN and SUB band audio can be mixed or sepa
-
rated when using stereo headphones according to set
mode settings. (p. 57)
y
MICROPHONE CONNECTOR [MIC]
Accepts the supplied or optional microphone.
• See p. 81 for appropriate microphones.
• See p. 15 for microphone connector information.
u
MIC GAIN CONTROL [MIC GAIN]
Adjusts microphone input gain.
MIC GAIN
Recommended level for
an Icom microphone
Increases
Decreases
How to set the microphone gain.
Set the [MIC] control so that the [MAIN]/[SUB] indicator (ALC
indicator) some times lights brighter during normal voice
transmission in SSB mode.
i
RF POWER CONTROL [RF PWR]
Continuously varies the RF output power from min-
imum to maximum.
144 MHz band
5–100 W
430(440) MHz band 5–75 W
1200 MHz band
1–10 W
(optional UX-910)
RF PWR
Increases
Decreases
2
2
PANEL DESCRIPTION
q
o
!0
!1 !2 !3
w
e
r
t
y
u i
Summary of Contents for IC-910H
Page 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Page 86: ...84 MEMO ...
Page 87: ...85 MEMO ...