![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497020.webp)
n
Initial settings
After resetting the transceiver, set controls and switch-
es as shown in the figure below.
Turn power ON, then check the display. If any of the
following indicators appear, turn them OFF as follows:
• Quick tuning step indicator “
Z
” : Push [kHz/MHz].
• RIT indicator “RIT”
: Push [RIT].
• Split indicator “SPLIT”
: Push [SPLIT].
CCW : Max. counterclockwise
4
18
BASIC OPERATION
n
When first applying power
(CPU resetting)
Before first applying power, make sure all connections
required for your system are complete by referring to
Chapter 3. Then, reset the transceiver using the follow-
ing procedure.
q
Make sure the transceiver power is OFF.
w
While pushing [MW 4] and [M-CL 5], push [POWER]
to turn power ON.
• The internal CPU is reset.
• The transceiver displays its initial VFO frequencies when
resetting is complete.
[POWER]
[MW 4] [M-CL 5]
Resetting
CLEARS all programmed contents in
memory channels and returns programmed values
in set mode to default values.
FM
VFO A
VFO A
FM
S 1
3
5
7
9
20
40
60dB
60dB
S 1 3 5
7 9
20
40
[TRANSMIT]: OFF
[COMP]: OFF
[VOX]: OFF
[AF] (SUB band):
CCW
[RF/SQL]: (SUB band)
12 o’clock
[MIC]: CCW
[SET]: OFF
[ATT(P.AMP)]: OFF
[RF PWR]: CCW
[AFC/NB]: OFF
[AGC]: OFF
[RIT]: 12 o’clock
[SHIFT]: 12 o’clock
[RIT]: OFF
[POWER]: OFF
[AF] (MAIN band):
CCW
[RF/SQL] (MAIN band):
12 o’clock
[SATELLITE]: OFF
Summary of Contents for IC-910H
Page 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Page 86: ...84 MEMO ...
Page 87: ...85 MEMO ...