![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497049.webp)
47
7
SCANS
n
Mode select scan
Scans the memory channels, desired operating mode
is programmed, only.
q
Push [M/S•BAND] or [SUB] to select the desired
frequency band to be scanned.
w
Push [V/M 1] to select memory mode.
e
Push [SSB/CW] or [FM] to select the desired oper-
ating mode to be scanned.
• The operating mode can also be changed during scan.
r
Push [SPCH•LOCK] for 1 sec.
• “LOCK” indicator appears.
t
Push [SCAN .] to start the mode select scan.
• “SCAN” indicator flashes.
y
Push [SCAN .] to cancel the scan.
w
Select
mode.
q
Select memory
mode.
e
appears.
r
Start.
t
Stop.
LOCK
MEMO
USB
VFO A
FM
LOCK
S 1
3
5
7
9
20
40
60dB
60dB
SCAN
S 1 3 5
7 9
20
40
Flashes while scanning
n
Tone scan
The transceiver can detect a subaudible tone frequen-
cy in a received signal. By monitoring a signal that is
being transmitted on a repeater input frequency, you
can determine the tone frequency required to access
the repeater.
q
Set the desired frequency or memory channel to be
checked for a tone frequency.
w
Push [FM] to select FM mode.
e
Push [TONE] or [CALL•T-SQL] for 1 sec. to activate
the subaudible tone.
• “T” or “T-SQL” indicator appears.
r
Push [SCAN .] for 1 sec. to start the tone scan.
• “SCAN” indicator flashes while scanning.
• Scan stops when a subaudible tone is detected.
• Scan becomes slower or quicker, respectively when the
noise squelch is open or closed.
t
Push [SCAN .] for 1 sec. to cancel the scan.
NOTE: The tone scan automatically changes tone
frequency setting to the detected tone frequency.
q
Select FM mode.
w
Start.
e
Stop.
FM
VFO A
60dB
SCAN
S 1 3 5
7 9
20
40
Flashes while scanning
SQL
T-
Summary of Contents for IC-910H
Page 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Page 86: ...84 MEMO ...
Page 87: ...85 MEMO ...