Icom IC-910H, Instruction Manual, Page: 45 / 88

43
6
MEMORY OPERATION
n
Memory clearing
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
q
Push [V/M 1] to select memory mode.
w
Push [DN
Z
] or [
Y
UP] to select the desired mem-
ory channel to be cleared.
e
Push [M-CL 5] for 1 sec. to clear the contents.
• The programmed frequency and operating mode disap -
pear.
• “BLANK” indicator appears.
r
To clear other memory channels, repeat steps
w
and
e
.
MEMO
USB
MEMO
BLANK
Operating band appears
after 2 sec.
MEMO
BLANK
Beep tone sounds.
n
Call channel
The call channel is a one-touch accessible channel for
recalling your most-often-used frequency. The IC-910H
has one call channel for each frequency band.
D Call up a call channel
q
Push [M/S•BAND] or [SUB] to select the desired
frequency band.
w
Push [CALL] to select the call channel.
e
Push [CALL] or [V/M 1] to return to previous display.
D Call channel programming
q
Push [M/S•BAND] or [SUB] to select the desired
frequency band.
w
Push [CALL] to select the call channel.
e
Enter the desired frequency using the keypad.
e.g.; When programming 145.8200 MHz.
Push [F-INP ENT]
⇒
[1]
⇒
[4]
⇒
[5]
⇒
[.]
⇒
[8]
⇒
[2]
⇒
[F-INP ENT]
• Select operating mode if required.
r
Push [MW 4] for 1 sec. to program the call channel.
D Transferring call channel contents
q
Push [M/S•BAND] or [SUB] to select the desired
frequency band.
w
Push [CALL] to select the call channel.
e
Push [M ≈ V 6] for 1 sec. to transfer the call channel
contents.
FM
USB
VFO A
BLANK