Icom IC-910H, Instruction Manual, Page: 53 / 88

51
8
SATELLITE OPERATION
n
Satellite operation
When your own signal can be received with a loop
test, satellite communication can be performed.
q
Rotate the tuning dial to re-tune the uplink frequen-
cy after pushing [SWP 0
S
], when shifting a fre-
quency with the Doppler effect.
• The downlink frequency readout (MAIN band) disap -
pears.
w
Rotate the tuning dial to re-tune the downlink fre-
quency after pushing [SCAN .
S
], when the operat-
ing station’s signal frequency is shifted.
• RIT function can also be used for downlink frequency
tuning within ±1 kHz range.
n
Satellite memory
The IC-910H has 10 satellite memory channels to
memorize both uplink and downlink frequencies and
operating modes, etc.
D Satellite memory selection
q
Push [SATELLITE] to enter the satellite mode.
w
Push [V/M 1] to select satellite memory mode.
• “MEMO” indicator and memory channel number are dis -
played beside the uplink frequency (SUB band) indica-
tion.
• Push [V/M 1] again to select satellite VFO.
e
Push [DN
Z
] or [
Y
UP] to select the desired satel-
lite mode memory channel.
• The channels 00–09 are selectable.
• By pushing and holding either switch, the satellite mem
-
ory channel changes continuously.
USB
MEMO
LSB
NOR
SATL
S 1 3 5 7 9 20 40 60dB
60dB S 1 3 5 7 9 20 40
Satellite memory
indication
D Satellite memory programming
q
Select the desired satellite memory channel.
• Push [SATELLITE] to enter the satellite mode.
• Push [V/M 1] to select satellite VFO mode.
• Push [DN
Z
] or [
Y
UP] to select the desired satellite
mode memory channel.
w
Set the desired downlink frequency to the MAIN
band and uplink frequency to the SUB band, as
well as operating mode.
• Push [SCAN .
M
] for downlink tuning, push [SWP 0
S
]
for uplink frequency tuning.
• Push [SUB] before the operating mode selection when
selecting operating mode for the uplink.
e
Push [MW 4] for 1 sec. to program the set contents
to the satellite memory channel.
• 3 beep tones sound.
NOTE: Tracking selection, normal or reverse, is not
programmed in the satellite memory channels.
USB
MEMO
LSB
SATL
REV
S 1 3 5 7 9 20 40 60dB
60dB S 1 3 5 7 9 20 40
Select the desired
satellite memory