![background image](http://html.mh-extra.com/html/icom/ic-910h/ic-910h_instruction-manual_611497043.webp)
41
6
MEMORY OPERATION
n
Programming in VFO mode
Memory channel programming can be performed ei-
ther in VFO mode or in memory mode.
q
Set the desired operating frequency and mode in
VFO mode.
• Push [V/M 1] to select VFO mode, if required.
• Tone frequency, offset frequency, etc., can also be pro
-
grammed.
• Input the frequency from the keypad
Push [F-INP ENT]
⇒
[1]
⇒
[4]
⇒
[4]
⇒
[.]
⇒
[2]
⇒
[6]
⇒
[8]
⇒
[F-INP ENT]
w
Push [DN
Z
] or [
Y
UP] to select the desired mem-
ory channel to be programmed.
e
Push [MW 4] for 1 sec. to program the displayed fre-
quency and operating mode into the memory chan-
nel.
To check the programmed contents, push [V/M 1] to
select memory mode.
FM
VFO A
USB
VFO A
USB
USB
VFO A
VFO A
Select desired memory
channel.
Beep tones sound.
Set desired frequency
and mode.
n
Programming in memory
mode
q
Push [V/M 1] to select memory mode.
w
Push [DN
Z
] or [
Y
UP] to select the desired mem-
ory channel to be programmed.
• The tuning dial rotation while pushing [F-INP ENT] also
selects memory channel.
e
Set the desired operating frequency and mode in
the memory mode.
• Tone frequency, offset frequency, etc., can also be pro
-
grammed.
• Set the desired operating frequency using with the key
-
pad when programming into blank channels. The tuning
dial rotation for frequency setting cannot be performed
when a blank channel is selected.
• Input the frequency from the keypad
Push [F-INP ENT]
⇒
[1]
⇒
[4]
⇒
[4]
⇒
[.]
⇒
[1]
⇒
[6]
⇒
[4]
⇒
[F-INP ENT]
r
Push [MW 4] for 1 sec. to program the displayed fre-
quency and operating mode into the memory chan-
nel.
MEMO
FM
MEMO
USB
MEMO
USB
MEMO
USB
Set desired frequency
and mode.
Beep tones sound.
Select desired memory
channel.
Summary of Contents for IC-910H
Page 1: ...INSTRUCTION MANUAL VHF UHF ALL MODE TRANSCEIVER i910H ...
Page 86: ...84 MEMO ...
Page 87: ...85 MEMO ...