![background image](http://html.mh-extra.com/html/icom/ic-7851/ic-7851_instruction-manual_612355183.webp)
11-4
11
MEMORY OPERATION
or
Hold down for 1 second.
Beep
Beep
Beep
[EXAMPLE]: Programming 7.088 MHz/LSB into memory
channel 12.
or
then
Hold down for 1 second.
Beep
Beep
Beep
[EXAMPLE]: Programming 21.288 MHz/USB into memory
channel 18.
■
Entering Memory channel contents
D
Entering in the Memory mode
q
Push [V/M] to select the Memory mode.
w
Select the desired memory channel by pushing
M-CH
[
Y
] or [
Z
]
.
• Memory channel contents are displayed in the memory
channel readout (below the frequency readout).
• “--.---.--” appears if the selected memory channel is a
blank channel (does not have contents).
e
Set the desired frequency, operating mode and fil-
ter.
• To enter contents into a blank channel, use direct fre
-
quency entry with the keypad or memo pads, and so
on.
r
Hold down [MW] for 1 second to save the displayed
frequency, operating mode, filter, and so on into the
memory channel.
You can enter Memory channel in either the VFO or
Memory mode.
D
Entering in the VFO mode
q
Push [V/M] to select the VFO mode.
w
Set the desired frequency, operating mode and fil-
ter.
e
Push M-CH
[
p
] or [
q
]
several times to select the de-
sired preset memory channel.
• The Memory list screen is convenient for selecting the
desired channel.
• Memory channel contents are displayed in the memory
channel readout (below the frequency readout).
• “--.---.--” is displayed if the selected memory channel is a
blank channel (does not have contents). Blank channels
cannot be entered in the VFO mode.
r
Hold down [MW] for 1 second to save the displayed
frequency, operating mode, filter and so on, into the
memory channel.
M-CH [
�
] or [
�
]
[MW]