![background image](http://html.mh-extra.com/html/icom/ic-7851/ic-7851_instruction-manual_612355030.webp)
1-14
1
PANEL DESCRIPTION
q
BAND WIDTH INDICATOR
(p. 7-5)
Displays the passband width of the IF filter.
w
MODE INDICATOR
Displays the selected mode.
e
SHIFT FREQUENCY INDICATOR
(p. 7-5)
Displays the shift frequency of the IF filter.
r
PASSBAND WIDTH INDICATOR
(p. 7-5)
Graphically displays the passband width for twin
PBT operation and the center frequency for IF shift
operation.
t
QUICK TUNING INDICATOR
(p. 4-7)
Appears when the Quick Tuning step function is ON.
y
BANDPASS FILTER INDICATOR
Appears when the narrow filter (500 Hz or less) is
selected in the CW, RTTY, or PSK mode.
u
RTTY TUNING INDICATOR
Displays the tuning level in the RTTY mode.
i
CLOCK READOUT
Displays the current time.
o
FREQUENCY READOUTS
Displays the operating frequency.
• Gray characters are used for a non-active frequency.
!0
IF FILTER INDICATOR
Displays the selected IF filter number.
!1
VFO/MEMORY CHANNEL INDICATOR
(p. 4-5)
Indicates the VFO mode or selected memory chan
-
nel number.
!2
TX ICON
“
➥
TX
” appears while transmitting.
Indicates the frequency used for transmit.
➥
• Displays on the Sub readout when the split function
is turned ON.
• A TX icon with doted rectangle, “
TX
” is displayed,
instead of the regular “
TX
” TX icon, when a fre-
quency outside of an amateur band frequency range
is selected. This function can be turned OFF in the
Others set screen
, if desired.
(p. 4-5)
!3
S/RF METER
(p. 4-11)
Displays the signal strength while receiving. Dis-
plays the relative output power, SWR, ALC or com-
pression levels while transmitting.
■
Display
q
w
w
t
!3
!2
o
!1
!0
e
e
r
r
y
y
u
u
i
q
t