![background image](http://html.mh-extra.com/html/icom/ic-7851/ic-7851_instruction-manual_612355005.webp)
iv
FOR CLASS B UNINTENTIONAL RADIATORS
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is en-
couraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit dif
-
ferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Changes or modifications to this device,
not expressly approved by Icom Inc., could void your
authority to operate this device under FCC regula-
tions.
FCC INFORMATION
ABOUT THE SUPPLIED CD
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired op-
eration.
WARNING:
MODIFICATION OF THIS DEVICE TO
RECEIVE CELLULAR RADIOTELEPHONE SERVICE
SIGNALS IS PROHIBITED UNDER FCC RULES AND
FEDERAL LAW.
The following instructions and installers are included
on the CD.
• Instruction manual
Instructions for the full operations, the same as this
manual
• Schematic diagram
Includes the schematic and block diagrams
• Adobe
®
Reader
®
Installer
Installer for Adobe® Reader®
A PC with the following Operating System is required.
• Microsoft
® Windows® 8.1, Microsoft® Windows®
8, Microsoft® Windows® 7 , or Microsoft® Windows
Vista
®
Starting the CD
D
Insert the CD into the CD drive.
q
• Double click “Menu.exe” on the CD.
• Depending on the PC setting, the Menu screen shown
below is automatically displayed.
Click the desired button to open the file.
w
• To close the Menu screen, click [Quit].
To read the Instruction manual or Schematic diagram,
Adobe® Reader® is required. If you have not installed it,
please install the Adobe® Reader® on the CD or down-
loaded it from Adobe Systems Incorporated’s website.
Quits the
Menu
screen
Installs the Adobe® Reader®
Opens the
Instruction manual
(this manual)
Opens the
Schematic diagram