![background image](http://html.mh-extra.com/html/icom/ic-7851/ic-7851_instruction-manual_612355045.webp)
2-13
2
SET MODE ITEMS
ITEMS
DESCRIPTIONS
RANGE OR VALUE
REF.
CW Normal Side
Carrier point setting for the CW mode op-
eration.
LSB, USB
p. 15-16
APF Type
Audio filter shape setting for APF.
SOFT, SHARP
MIC AF Out
Band selection for audio output from [MIC]
(pin 8).
MAIN+SUB, SUB
MIC Input DC Bias
Bias voltage setting for modulation input line
([MIC] pin 1).
OFF, ON
External Keypad (VOICE)
[EXT KEYPAD] (rear
panel), or [MIC] (front
panel)
Voice memory trans
-
mission setting for
an external keypad.
OFF, ON
External Keypad (KEYER)
Memory keyer trans-
mission setting for
an external keypad.
External Keypad (RTTY)
RTTY memory trans-
mission setting for
an external keypad.
External Keypad (PSK)
PSK memory trans-
mission setting for
an external keypad.
Keyboard [F1]–[F8] (VOICE)
[USB A] (rear panel)
Voice memory trans
-
mission for the con-
nected
keyboard
([F1]~[F8] keys).
OFF, ON
Keyboard [F1]–[F8] (KEYER)
Memory keyer trans-
mission for the con-
nected
keyboard
([F1]~[F8] keys).
Screen Capture [POWER] SW
Screen capture function setting for the
[POWER] switch operation.
OFF, ON
p. 15-17
Screen Capture Keyboard [Print
Screen]
Screen capture function setting for the [Print
Screen] key on the connected keyboard.
Screen Capture Storage Media
Storage media setting for the captured
screen image file to save.
SD CARD, USB-Memory
Screen Capture Data Format
Saving file format setting for the captured
screen image file.
PNG, BMP
Shutdown Function
Shutdown option selection for the remote
power control.
Shutdown,
Standby/Shutdown
CI-V Baud Rate
CI-V data transfer speed setting.
4800, 9600, 19200 (bps), Auto
CI-V Address
Transceiver's address setting for the CI-V
remote control.
02h~8Eh~DFh
CI-V Transceive
Transceive function setting for the CI-V re
-
mote control.
OFF, ON
CI-V USB/LAN
➡
REMOTE Trans-
ceive Address
CI-V address setting for the 2nd transceiv
-
er or receiver controlled by the transceive
function.
00h~DFh
CI-V Output (for ANT)
Antenna controller Status data output set-
ting.
OFF, ON
p. 15-18
OTHERS SET(Continued)
■
SET [F-7]
OTHERS [F-5]