![background image](http://html.mh-extra.com/html/icom/ic-7851/ic-7851_instruction-manual_612355175.webp)
10-6
10
USING AN SD CARD OR USB FLASH DRIVE
Loading the saved data files onto an
■
SD card or USB flash drive
Memory channels and transceiver’s settings on the
card or flash drive can be copied to the transceiver.
This function is convenient when:
• Copying the saved data to another
IC-7851
to oper-
ate with the same data.
• Using one
IC-7851
by two or more operators with
their own individual data.
Saving the current data is recommended before load-
ing other data into the transceiver.
•
Setting load screen
• Confirmation window
Displays the
q
Setting load screen
.
SET [F-7]
SD/USB [F-7]
LOAD [F-1]
Push [SD/USB](F).
w
•
Push
[SD/USB](F) toggles the file load source between
the card and the flash drive.
Push [
e
∫
](F) or [
√
](F) to select the desired file to be
loaded.
Push [LOAD](F).
r
• Opens a confirmation window.
• To cancel loading, push [CANCEL](F).
Push [OK](F).
t
• Loads the data settings of the selected source.
• While loading from the card, the indicator to the left of
the [SD CARD] slot lights.
• While loading from the flash drive, the indicator to the
right of the [SD CARD] slot lights.
• You can change the content to be loaded in the
Load set
screen
(p. 10-4)
.
( SET [F-7] > SD/USB [F-7] > LOAD [F-1] >
Load Contents)
After loading ends, reboot the transceiver
y
NOTE: To complete the loading process, you must
reboot the transceiver.