![background image](http://html.mh-extra.com/html/icom/ic-7851/ic-7851_instruction-manual_612355152.webp)
8-5
8
FUNCTIONS FOR TRANSMIT
■
About the
∂
TX function
The
∂
TX function shifts the transmit frequency up to
±9.999 kHz in 1 Hz steps (10 Hz steps when the 1 Hz
step readout is not visible) without shifting the receive
frequency.
Push [
q
∂
TX].
• “
∂
TX
” is displayed.
Rotate [RIT/
w
∂
TX].
To reset the
e
∂
TX frequency, hold down [CLEAR] for
1 second.
• If the the Quick RIT/
∂
TX clear function is ON, push
[CLEAR] to reset the RIT frequency.
(p. 15-15)
r
To cancel the
∂
TX function, push [
∂
TX] again.
• “
∂
TX
” disappears.
D
∂
TX
monitor function
When the
∂
TX function is ON, holding down [XFC] al-
lows you to directly monitor the transmit frequency.
✔
For your convenience — Calculate function
The shift frequency of the
∂
TX function can be added
to or subtracted from the displayed frequency.
➥
While displaying the
∂
TX shift frequency, hold down
[
∂
TX] for 1 second.
■
About the Monitor function
The Monitor function allows you to monitor your trans-
mit signals in any mode. Use this to check voice char-
acteristics while adjusting transmit audio parameters.
(p. 15-4)
The CW sidetone functions regardless of the
[MONI] key setting.
q
Push [MONI].
• The Monitor function is turned ON.
• [MONI] indicator above this key lights white.
w
Rotate [MONI GAIN] for the clearest audio output
while holding down [PTT] and speaking into the mi-
crophone at your normal voice level.
NOTE:
When using the VOX voice delay
(p. 8-3)
,
turn the TX monitor function OFF or the transmitted
audio will echo.
[XFC]
[CLEAR]
[TX]
[
∂
TX/RIT]
[MONI] indicator
[MONI GAIN]
[MONI]
•
∂
TX function ON