![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061082.webp)
t
CLONING MENU [Cloning]
Push to display cloning menu and cloning information dia-
log box.
y
HELP MENU [Help]
Push to display one point help, help contents, cloning soft-
ware revision information.
u
Tool bar
Short cut key appears on the tool bar when clicking the tool
bar function in the [View] menu.
■
Edit menu
The ‘Edit Memory ch’ window allows you to edit the memory
channel information.
The memory channel list can hold up 99 ch 3 pairs of
programmed scan edges + 1 call channel.
NOTE: ‘Narrow FM’ is available for the VHF band of the
Europe and Italy versions only.
NOTE: Read all the transceiver cloning data into the PC
before starting editing with this cloning software, otherwise
the frequency data may not be cloned properly to your
transceiver.
■
DTMF autodial
The transceiver has 14 DTMF memory channels (D0–D9,
DA–DD) for storage of often-used DTMF codes of up to 16
digits. One of these channels is encoded when the PTT is
pushed.
When slow DTMF speeds are required, the transceiver’s rate
of DTMF transmission can be adjusted.
“E” stands for “
M
” and “F” stands for “#.”
78
16
CS-2800 CLONING SOFTWARE