![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061038.webp)
34
7
MEMORY/CALL CHANNELS
■
Programming during
selection via the microphone
The HM-98 microphone can also be used to pro-
gram memory channels.
q
Select the desired band with [BAND].
w
Select VFO mode with [VFO].
e
Set the desired frequency.
• Set other data (e.g. offset frequency, duplex direction, subaudible
tone frequency, etc.), if required.
r
Push [FUNC] then [
E
MW] momentarily to indicate mem-
ory channels.
• Do not hold [MW] for more than 0.5 sec., otherwise the memory
channel will overwrite the selected memory channel.
t
Push [
Y
] or [
Z
] to select the desired channel.
• Call channel (C), VFO (- -) and scan edges (1A – 3B), as well as
regular memory channels, can be programmed in this way.
y
Push [FUNC] then [
E
MW] for 2 sec. to program.
• Memory channel number automatically advances when continu-
ing to push [MW] after programming.
■
Programming after selection
via the microphone
The HM-98 microphone can also be used to pro-
gram memory channels.
q
Select the desired band with [BAND].
w
Select memory mode with [MR].
e
Set the desired memory channel to be programmed with
[
Y
] or [
Z
].
r
Push [VFO] to select VFO mode.
t
Set the desired frequency:
• Set other data (e.g. offset frequency, duplex direction, subaudible
tone frequency, etc.), if required.
y
Push [FUNC] then [
E
MW] for 2 sec. to program.
• Memory channel number automatically advances when continu-
ing to push [MW] after programming.
MW
A
MW
A