![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061034.webp)
30
6
REPEATER OPERATION
■
Offset frequency
When communicating through a repeater, the transmit fre-
quency is shifted from the receive frequency by an amount
determined by the offset frequency.
q
Select the mode/channel you wish to set the offset fre-
quency to, such as VFO mode or memory/call channel.
w
Push the desired band’s [
(MAIN)
EDIT] for 2 sec. to enter the
edit screen.
• Push [CHG/L] if [(MAIN) EDIT] is not displayed.
e
Push [
Y
] or [
Z
] to select the ‘OW’ item.
• Left-hand tuning dial can also select the item.
r
Rotate the right-hand tuning dial to select the desired fre-
quency.
• The offset frequency is set temporarily. Push [MW] for 2 sec. to
store the offset frequency permanently.
• Push [MHz] to toggle the 1 MHz tuning step ON and OFF.
• The color of the frequency indication changes when the setting is
different from the memory or call channel contents.
t
If you want to set other channels, push [CH] then rotate the
right-hand tuning dial. Repeat
e
and
r
to select the de-
sired frequency.
y
Push [
ï
] to exit the edit screen.
ï
Y
Z
CH
SKIP
MW
MEMORY E D I T
( T S=1 2 . 5 k)
Name
ICOM2800
R - Tone
C - Tone
OW
1 2 3 . 0
8 8 . 5
0.600
145.320
12
MHz