![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061031.webp)
27
6
REPEATER OPERATION
q
Select the desired band with [BAND].
w
Set the receive frequency (repeater output fre-
quency).
e
Push [
u
DUP–] to select –duplex; push
[
i
DUP+] for +duplex.
r
Push [FUNC] then [
u
TONE] to turn ON the
subaudible tone encoder according to repeater
requirements.
• Refer to p. 29 for tone frequency setting.
• When the repeater requires a different tone system,
see p. 29.
t
Push and hold [PTT] to transmit.
y
Push [
q
MONI] to check whether the other sta-
tion’s signal can be received directly.
u
Release [PTT] to receive.
i
To return to simplex operation, push [
o
SIMP].
o
To turn OFF the subaudible tone encoder, push
[FUNC], then [
G
T-OFF].
➲
CONVENIENT
Tone scan function:
When you don’t know the subaudible
tone used for a repeater, the tone scan is convenient for de-
tecting the tone frequency.
q
Push the desired band’s [
(M/C)
SCN] for 2 sec. to enter scan
screen.
• Push [CHG/L] if [(M/C) SCN] is not displayed.
w
Push [TON] to start tone scan. Push [
í
] for 2 sec. to exit
scan screen. See p. 53 for more information.
D
DTMF tones
q
Push [BAND] to select the desired band.
w
Push [DTMF-S], then push the keys of the de-
sired DTMF digits.
• The function indicator lights green.
• 0–9, A–D,
M
(E) and #(F) are available.
• Cancel the DTMF memory encoder in advance, if
necessary. (p. 54)
• Push [DTMF-S] again to return the keypad to nor-
mal function control.
• The transceiver has 14 DTMF memory channels
(D0–D9, DA–DD) for auto patch operation. (p. 54)
DTMF-S
DUP–
7
DUP+
8
SIMP
9