![background image](http://html.mh-extra.com/html/icom/ic-2800h/ic-2800h_instruction-manual_612061079.webp)
75
15
OTHER FUNCTIONS
■
Partial reset
If you want to initialize the operating conditions (VFO fre-
quency, VFO settings, set mode contents) without clearing the
memory contents, a partial resetting function is available for
the transceiver.
Band conditions can be reset independently.
D
VHF band partial resetting
➥
While pushing the 2nd switch from the top on the left side,
turn power ON to partially reset the transceiver.
• “144M VFO Clear” appears when resetting the VHF band condi-
tion.
D
UHF band partial resetting
➥
While pushing the 2nd switch from the top on the right side,
turn power ON to partially reset the transceiver.
• “430M (440M) VFO Clear” appears when resetting the UHF band
condition.
D
Partial resetting of both bands
➥
While pushing the 2nd switches from the top on both the
left and right sides, turn power ON to partially reset the
transceiver.
• “VFO Clear” appears when resetting the VHF and UHF band
condition.
■
All reset
The function display may occasionally display erroneous in-
formation (e.g. when first applying power). This may be
caused externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial resetting is also available. See previous section for details.
CAUTION:
Resetting the transceiver CLEARS all mem-
ory information and initializes all values in the transceiver.
➥
While pushing the 3rd switches from the top on both the left
and right sides, turn power ON to reset the CPU.
• “Memory Clear” appears when resetting the CPU.
[POWER]
All reset
UHF partial
reset
VHF partial
reset